Connector is a member of our technical staff in regular contact. Between its role is very simple in the circuit is blocked at the barrier or isolated circuits, bridge the communication gap, allowing current to flow, the circuit to achieve a predetermined function. Connectors are electronic devices indispensable component, observe current flow along the path, you will always find one or more connectors. Connector within a certain period should perform safety checks to ensure it's working, check the connectors should note the following:
(1) examination of the connector must be in the state of the ignition switch is turned off, otherwise they will be self-inductance current or short circuit and burn-related electrical element.
(2) When removing the wire connectors, to carefully observe the connectors way; first to disassemble the connector in the case of release or press the locking of the locking spring, should not be strong to drag. When refitted, proceed in the opposite way to the connector plug in the end and locked.
(3) Certain waterproof wire connector remove the detector, should pay attention to carefully remove the holster, to prevent ruining the leather, and the impact waterproof effect; in the re-equipment, be sure to waterproof suit in place. Otherwise, it may cause water to enter the connector and cause circuit failure.
(4) When using a multimeter to check the connector, when the table can not stick to the metal terminal insertion force is too large to prevent deformation caused by poor contact.